| Page: 5 |
A single bin is set up for each waveform in the "W.F. # list". Each action potential in the range to be analysed triggers a "sweep" from each of the above waveforms. The sweeps are added to obtain a single average for each waveform.
The parameter "W.F. avg window" controls the duration of each sweep, and "W.F. avg delay" is a positive, zero or negative offset from the time the sweep is triggered to the time the sweep's window begins.
| Key sequence | Parameter | Initial Value |
|---|---|---|
| <Esc>AWSA | Analysis method | Waveform averaging - spike triggered |
| <Esc>SF | Run file | ? |
| <Esc>SRS | Start of run | 0 msec |
| <Esc>SRE | End of run | 2.14748e_08 msec |
| <Esc>SRD | # of deleted sections | 0 |
| <Esc>SCID | Phase selection delay | 0 msec |
| <Esc>SCIW | Phase selection window | 0.1 msec |
| <Esc>SSWN | Spike W.F. # | ? |
| <Esc>Wn<CR>SS | W.F. spikes | ? |
| <Esc>SAWL | W.F. # list | All |
| <Esc>SAWD | W.F. avg delay | 0 msec |
| <Esc>SAWW | W.F. avg window | ? |
| <Esc>SAP | Preview averaged data | N |
| <Esc>SDD | Graph description | "" |
| <Esc>SDSA | Auto scale | Y |
| <Esc>SDSXS | X scale bars | Y |
| <Esc>SDSYS | Y scale bars | Y |
| <Esc>SDTI | Interpolation | Y |
| <Esc>SDTX | Extend interpolation | Y |
| <Esc>SDTR | Display relative levels | N |
| <Esc>SDTS | Display std dev | N |
| <Esc>SDTT | Top title display | Y |
| <Esc>SDUL | Sample units | mV |
| <Esc>SDUT | Time units | msec |
SCRC WWW administrator:
www@scrc.umanitoba.ca
Copyright © 2011 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.