| Page: 239 |
Affects: W.F. level vs W.F. level graphs
For graphs of W.F. level vs W.F. level, this parameter can be set to reject Y-axis levels that are too high. It can be set along with the "Second min W.F. ampl." parameter to limit the range of levels included in the graph.
This parameter can be set by specifying the level in mV or A/D units. It can also be set visually, using the pointing device to indicate, on the displayed waveform, the maximum level (and the minimum).
| Key sequence | Parameter | Initial Value |
|---|---|---|
| <Esc>SLSWRU | Second max W.F. ampl. | 79997.6 mV |
SCRC WWW administrator:
www@scrc.umanitoba.ca
Copyright © 2019 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.