Page: 244

Analysis Help
Parameter: Trace spike discr.

Home › Software › Analysis Help › Parameters › Trace spike discr.


Full name: Window discriminator for spikes on trace
Units: V or A/D
Range: [ -32767 A/D, 32767 A/D ]
Initial value: 32767 A/D

Affects: graphs of trace spike count or latency vs step cycle

For each frame in a trace spike count or latency graph, the selected trace is searched for spikes. The spike measurement is controlled by the "Trace spike threshold", "Trace spike hysteresis", and "Trace spike discr.". Any spike that crosses the threshold, does not exceed the discriminator level, and falls below the hysteresis, is included in the graph. Spikes which exceed this discriminator level are rejected.

 

Key sequence  Parameter Initial Value
<Esc>SSTD  Trace spike discr.  32767 AD

 

SCRC WWW administrator: www@scrc.umanitoba.ca
Copyright © 2019 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.