Page: 245

Analysis Help
Parameter: Trace spike delay

Home › Software › Analysis Help › Parameters › Trace spike delay


Full name: Delay to start of spikes on trace
Units: sec or per
Range: [ 0, 2 gp ]
Initial value: not set

Affects: graphs of trace spike count or latency vs step cycle

This delay is simply an offset from the start of a frame's window where the search for spikes is to begin; if set, spikes before this delay are ignored.

 

Key sequence  Parameter Initial Value
<Esc>SSTO  Trace spike delay  ?

 

SCRC WWW administrator: www@scrc.umanitoba.ca
Copyright © 2019 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.