Page: 4

Analysis Help
Analysis: Trace averaging based on tag value

A number of bins are set up for each trace in the "Trace # list", corresponding to the tag values in the "Tag list". Each frame in the range to be analysed is added in to the appropriate bin, based on its tag value and where this value appears in the list. Deleted frames, and frames whose tag values are not in the "Tag list" are excluded.


Key sequence  Parameter Initial Value
<Esc>ATB  Analysis method  Trace averaging based on tag value
<Esc>SF  Run file  ?
<Esc>SRS  Start of run  0 msec
<Esc>SRE  End of run  2.14748e_08 msec
<Esc>SRD  # of deleted sections  0
<Esc>ST  Tag list  All
<Esc>SCID  Phase selection delay  0 msec
<Esc>SCIW  Phase selection window  0.1 msec
<Esc>SLTA  Active cycle phase only  N
<Esc>SCW  Cycle W.F. #  ?
<Esc>Wn<CR>SCV  Cycle crossings  ?
<Esc>SCS  Base cycles on stop time  N
<Esc>SCT  Base cycles on spike trains  N
<Esc>SATF  Frame list  All
<Esc>SATT  Trace # list  All
<Esc>SAB  # bins- avg  ?
<Esc>SAP  Preview averaged data  N
<Esc>SDD  Graph description  ""
<Esc>SDSA  Auto scale  Y
<Esc>SDSXS  X scale bars  Y
<Esc>SDSYS  Y scale bars  Y
<Esc>SDTI  Interpolation  Y
<Esc>SDTX  Extend interpolation  Y
<Esc>SDTR  Display relative levels  N
<Esc>SDTS  Display std dev  N
<Esc>SDTT  Top title display  Y
<Esc>SDUL  Sample units  mV
<Esc>SDUT  Time units  msec


SCRC WWW administrator:
Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.