Page: 241

Analysis Help
Parameter: Spike trace #


Full name: Trace # for spike analysis
Range: [ 0, 99 ]
Initial value: not set

Affects: graphs of trace spike count or latency vs step cycle

This parameter chooses which trace will be scanned for spikes for graphs using trace spike counts or latencies. After setting this parameter, you should also set the "Trace spike threshold", "Trace spike hysteresis", "Trace spike discr.", and "Trace spike delay" parameters appropriately for the chosen trace.

 

Key sequence  Parameter Initial Value
<Esc>SSTN  Spike trace #  ?

 


SCRC WWW administrator: www@scrc.umanitoba.ca
Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.