Page: 411

Analysis Help
Waveform Parameter: Spike discriminator

Full name: Window discriminator for W.F. spike analysis
Units: V or A/D
Range: [ -32767 A/D, 32767 A/D ]
Initial value: not set

Affects: all W.F. spike analyses, automatic generation of spike activity markers

When the associated waveform is searched for spikes, the spike measurement is controlled by the "Spike threshold", "Spike hysteresis", and "Spike discriminator". Any spike that crosses the threshold, does not exceed the discriminator level, and falls below the hysteresis, is treated as a valid spike. Spikes which exceed this discriminator level are rejected.


Key sequence  Parameter Initial Value
<Esc>Wn<CR>SSD  Spike discriminator  0 mV


SCRC WWW administrator:
Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.