Page: 227 |

Parameter: Second trace ampl. integration

Full name: Integrate (sum up) points in second sample window

Parameter type: Y or N

Initial value: N

Affects: Y-axis of Y-vs-X trace amplitude graphs

When this parameter is set to N, as it is initially, the program searches the "Second trace ampl. point window" (if one is specified) for a maximum or minimum level. This is repeated for every frame included in the graph.

If you set it to Y, then the program sums up the points in that range instead. For each frame, the reference level for the Y axis is determined first, in the usual way. Then the program takes every point in the "Second trace ampl. point window" and subtracts the reference level. The sum of these differences is taken as the Y-axis sample value for the frame.

Note that this parameter will also override the "Average second trace ampl. sample" option.

Key sequence | Parameter | Initial Value |
---|---|---|

<Esc>SLSTWI | Second trace ampl. integration | N |

SCRC WWW administrator: www@scrc.umanitoba.ca Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.