Page: 38 |
The intervals between action potentials occurring on the waveform selected by the "Spike W.F. #" are displayed by spike occurrence within cycles on the waveform selected by the "Cycle W.F. #". That is, the X-axis is divided into a number of "bins", corresponding to individual spike occurrences in each cycle, then for each spike on the former waveform, the interval from the previous spike is calculated, and plotted on the graph at the position (or spike number) in the current cycle where this spike occurred. For each cycle, the intervals for all spikes falling into one of these "bins" are displayed, overlaid by data from all other cycles in the range to be analysed. You can also skip spikes, or sample spike occurrences from the end of the cycle, just like for the "W.F. averaging - spike occurrence in cycle" analysis, using the "Spikes to skip" parameter.
No interval is plotted for the first spike of the first cycle, if no previous spike was found, in the selected range to be analysed, to permit an interval calculation. If the spike trains for the former waveform have been properly set, statistics will be given for activity on this waveform, relative to the above cycles. Also, in this case, intervals are calculated and plotted only for spikes in the same spike train, and no interval is plotted for the first spike in each train.
If the "Take interval after spike" option is enabled, the interval to the following spike, rather than the previous one, is calculated. No interval is plotted for the last spike of the last cycle, if no following spike is found in the selected range. If spike trains have been set, no interval is plotted for the last spike in each train.
Key sequence | Parameter | Initial Value |
---|---|---|
<Esc>AGASIR | Analysis method | Raw inter-spike interval vs spike occ. |
<Esc>SF | Run file | ? |
<Esc>SRS | Start of run | 0 msec |
<Esc>SRE | End of run | 2.14748e_08 msec |
<Esc>SRD | # of deleted sections | 0 |
<Esc>SCW | Cycle W.F. # | ? |
<Esc>Wn<CR>SCV | Cycle crossings | ? |
<Esc>SCS | Base cycles on stop time | N |
<Esc>SCT | Base cycles on spike trains | N |
<Esc>SSWN | Spike W.F. # | ? |
<Esc>Wn<CR>SS | W.F. spikes | ? |
<Esc>SSWS | Spikes to skip | 0 |
<Esc>SSWR | Reverse spike occurrences | N |
<Esc>SMIA | Take interval after spike | N |
<Esc>SGB | # bins- graph | 100 |
<Esc>SDSA | Auto scale | Y |
<Esc>SGR | Regression degree | 0 |
<Esc>SSWA | Base spike stats. on start | N |
<Esc>SDD | Graph description | "" |
<Esc>SDM | Main graph title | "" |
<Esc>SDGG | Graph type | Adaptive |
<Esc>SDGD | Diamond symbol size | 5 |
<Esc>SDGT | Graph tag symbol | "" |
<Esc>SDSR | Round out scale bars | Y |
<Esc>SDSXS | X scale bars | Y |
<Esc>SDSYS | Y scale bars | Y |
<Esc>SDSXL | Min X | 0 |
<Esc>SDSXU | Max X | 0 |
<Esc>SDSYL | Min Y | 0 |
<Esc>SDSYU | Max Y | 0 |
<Esc>SDTT | Top title display | Y |
<Esc>SDUT | Time units | msec |