Page: 358

Analysis Help
Parameter: Overlay W.F. #

Full name: Waveform # for signal to be overlayed during W.F. parameter setting
Range: [ -1, 99 ]
Initial value: not set

Affects: waveforms displayed when setting parameters visually

Set this parameter to the number of the waveform to be overlayed on the display, when setting waveform parameters visually. This allows two waveforms to be shown simultaneously, to aid in setting time parameters. The waveform selected by this parameter will be shown using the marker colour, while the waveform for which you are setting waveform parameters will appear in the usual axes colour.


Key sequence  Parameter Initial Value
<Esc>SDWO  Overlay W.F. #  ?


SCRC WWW administrator:
Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.