Page: 273

Analysis Help
Parameter: # bins- avg

Full name: Number of bins for W.F./trace averaging
Range: [ 1, 32767 ]
Initial value: not set

Affects: all trace and waveform averaging

When calculating averaged sweeps from traces or waveforms, this parameter determines how many bins will be used for each trace or waveform. Depending on the type of averaging selected, bins may represent cycle phase, waveform amplitude, tag value, spike occurrences within cycles, or spike interval. Whatever range is represented is evenly divided into the number of intervals given by this parameter.


Key sequence  Parameter Initial Value
<Esc>SAB  # bins- avg  ?


SCRC WWW administrator:
Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.