Page: 257

Analysis Help
Parameter: Max inter-spike interval


Full name: Maximum inter-spike interval included in average
Units: sec or per
Range: [ 0, 2 gp ]
Initial value: not set

Affects: W.F. averaging based on spike interval

The Min and Max "inter-spike interval" parameters define the range of interval lengths which is divided into bins. Intervals outside this range will be excluded from the average (no sweeps will be taken at the times these occur).

 

Key sequence  Parameter Initial Value
<Esc>SMIU  Max inter-spike interval  ?

 


SCRC WWW administrator: www@scrc.umanitoba.ca
Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.