Page: 289

Analysis Help
Parameter: Display cycle lengths

Home › Software › Analysis Help › Parameters › Display cycle lengths


Full name: Display of cycle durations on W.F. display
Parameter type: Y or N
Initial value: N

Affects: Raw waveform display

If this option is enabled, the cycle lengths are indicated at the bottom of the display, provided that the "Cycle W.F. #" parameter has been set, and the cycle related waveform parameters for that waveform have also been properly set.

 

Key sequence  Parameter Initial Value
<Esc>SWC  Display cycle lengths  N

 

SCRC WWW administrator: www@scrc.umanitoba.ca
Copyright © 2019 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.