Page: 288

Analysis Help
Parameter: Display both crossings

Home › Software › Analysis Help › Parameters › Display both crossings


Full name: Display of both start and end markers on W.F.
Parameter type: Y or N
Initial value: N

Affects: Raw waveform display

If the "Display both crossings" option is enabled, in addition to the "Display crossings" option, then a second set of slightly smaller markers will show the end of activity in each cycle.

 

Key sequence  Parameter Initial Value
<Esc>SWB  Display both crossings  N

 

SCRC WWW administrator: www@scrc.umanitoba.ca
Copyright © 2011 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.