Page: 346

Analysis Help
Parameter: Blanking window


Full name: Window duration for W.F. blanking
Units: sec or per
Range: [ 0, 2 gp ]
Initial value: 3 msec

Affects: Blanking operation

This parameter specifies the length of the blanking interval triggered by each spike on the waveform selected by the "Spike W.F. #".

You must also set the "Blanking delay" to indicate when the interval starts, before or after the spike.

 

Key sequence  Parameter Initial Value
<Esc>MBW  Blanking window  3 msec

 


SCRC WWW administrator: www@scrc.umanitoba.ca
Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.