Page: 345

Analysis Help
Parameter: Blanking delay


Full name: Delay to window for W.F. blanking
Units: sec or per
Range: [ -2 gp, 2 gp ]
Initial value: -1 msec

Affects: Blanking operation

This parameter specifies the time (positive or negative) from the start of a spike on the waveform selected by the "Spike W.F. #", to the start of the associated blanking interval.

You must also set the "Blanking window" to indicate the length of the blanking interval.

 

Key sequence  Parameter Initial Value
<Esc>MBD  Blanking delay  -1 msec

 


SCRC WWW administrator: www@scrc.umanitoba.ca
Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.