Page: 88 |
The intervals between action potentials occurring on the waveform selected by the "Spike W.F. #" are averaged for each spike train on that waveform, and the averages are displayed for each train. That is, for each spike on this waveform, the interval from the previous spike is calculated. For each train, the mean interval is then plotted on the graph at the position representing the train number.
The spike trains for this waveform must be properly set. Intervals are calculated and averaged only for spikes in the same spike train, and no interval is measured for the first spike in each train.
Key sequence | Parameter | Initial Value |
---|---|---|
<Esc>AGABI | Analysis method | Averaged inter-spike interval vs Train number |
<Esc>SF | Run file | ? |
<Esc>SRS | Start of run | 0 msec |
<Esc>SRE | End of run | 2.14748e_08 msec |
<Esc>SRD | # of deleted sections | 0 |
<Esc>SSWN | Spike W.F. # | ? |
<Esc>Wn<CR>SS | W.F. spikes | ? |
<Esc>SGR | Regression degree | 0 |
<Esc>SDD | Graph description | "" |
<Esc>SDM | Main graph title | "" |
<Esc>SDGG | Graph type | Adaptive |
<Esc>SDGH | Histogram type | Adaptive |
<Esc>SDGS | Std. deviation type | Adaptive |
<Esc>SDGD | Diamond symbol size | 5 |
<Esc>SDGT | Graph tag symbol | "" |
<Esc>SDSA | Auto scale | Y |
<Esc>SDSR | Round out scale bars | Y |
<Esc>SDSXS | X scale bars | Y |
<Esc>SDSYS | Y scale bars | Y |
<Esc>SDSXL | Min X | 0 |
<Esc>SDSXU | Max X | 0 |
<Esc>SDSYL | Min Y | 0 |
<Esc>SDSYU | Max Y | 0 |
<Esc>SDSYHL | Min Y- hist | 0 |
<Esc>SDSYHU | Max Y- hist | 0 |
<Esc>SDTA | Show areas under curves | N |
<Esc>SDTH | Histogram display | N |
<Esc>SDTS | Display std dev | N |
<Esc>SDTT | Top title display | Y |
<Esc>SDUT | Time units | msec |