Page: 229

Analysis Help
Parameter: Amplitude W.F. #

Full name: Waveform # for amplitude measurement
Range: [ 0, 99 ]
Initial value: 0

Affects: all W.F. amplitude graphs, and averaging based on W.F. level

For analyses using W.F. amplitude (or W.F. level), this parameter selects the waveform where the measurements will be taken. The "Min W.F. amplitude" and "Max W.F. amplitude" parameters can then be used to limit the range of levels included in the analysis.

In the case of "W.F. level vs W.F. level" graphs, this parameter selects the waveform represented on the X-axis.


Key sequence  Parameter Initial Value
<Esc>SLWN  Amplitude W.F. #  0


SCRC WWW administrator:
Copyright © 2017 G. R. Detillieux, Spinal Cord Research Centre, The University of Manitoba.